Paper Path |
The reader has a paper path that is easily accessible for cleaning jams and
cleaning the optics. A simple hinged connection allows the upper assembly
to open for complete access to the paper path |
Scan Area |
Reads up to 12 rows at .25” centers with 80 mark positions per side |
Feed Method |
Manual insertion with powered transport |
Scanning Speed |
20” (50.8 cm) per second |
Throughput |
Approximately 25-30 cards per minute |
Form Size |
3.25” x 5” to 3.25” x 12”; 8.2 cm x 12.7 cm to 8.2 cm to 30.5 cm |
Paper Weight |
18 to 100 lb bond, ledger, index or OCR from .004” to .010” thick |
Read Technique |
Graded index fiber lens; double-sided, manual feed |
Form Marking (Visible Red) |
#2 pencil; blue or black ballpoint pen; blue or black felt-tip pen; keypunched slots |
Form Marking (Infrared Option) |
#2 pencil; keypunched slots; preprinted marks |
Interface/Baud Rate |
RS-232c asynchronous (PC serial) at 9600 baud or USB (available as an option) |
OMR Status/Version |
Dynamically request an 8-bit status byte or firmware version from OMR |
Data Flow Control |
Utilizes XON/XOFF to control the flow of data from the OMR to the application program |
Data Output |
Binary ASCII values |
Timing Track Selection |
Select top (right)/bottom (left) for the location of the timing track |
Timing Track Alignment |
In-line (data mark area between leading and trailing edge of timing mark) |
Dimensions |
6.75” wide x 4.18” high x 7.18” long (171.45 mm wide x 106.17 mm high x 182.37 mm long) |
Power Requirements |
Universal power adapter 100-240 VAC 47-63 Hz |
Operating Conditions |
41° to 113° Fahrenheit; 5° to 45° centigrade; 30% to 80% humidity, noncondensing |
Weight |
4 lbs (1.8 kg); shipping weight 6 lbs (2.7kg) with universal power adapter |
Dual Roller Option |
The standard Mark-IT 1200 requires a 0.750” white space lead in from the
leading edge of the card to the first timing mark (or data marking areas).
The dual idler/roller option drops the 0.750” requirement down to 0.250”,
making it compatible with the IBM card specification and most gaming bet
slip and receipt requirements. |