Paper Path |
The readers paper path is easily accessible for cleaning jams and cleaning
the optic area. A simple hinged connection allows the upper assembly to
open for complete access to the paper path |
Scan Area |
Reads up to 12 rows at .25 centers with 80 mark positions per side |
Feed Method |
Automatic card feeder with powered transport; approximately 200 cards
sized at 7-3/8 or 100 cards sized at 12 per batch |
Scanning Speed |
30 inches (76.2 cm) per second or approximately 10,000 cards per hour |
Throughput |
Approximately 25-30 cards per minute |
Form Size |
3.25 x 5 to 3.25 x 12 (8.2 cm x 12.7 cm to 8.2 cm x 30.5 cm) |
Paper Weight |
18 to 100 lb. bond, ledger, index or OCR from .004 inch to.010 inch thick |
Read Technique |
Graded index fiber lens, single sided |
Form Marking (Visible Red) |
#2 pencil; blue or black ballpoint pen; blue or black felt-tip pen; keypunched slots |
Form Marking (Infrared Option) |
#2 Pencil keypunched slots, preprinted marks |
Interface/Baud Rate |
RS-232C asynchronous (PC Serial) at 9600 baud or optional USB interface |
OMR Status/Version |
Dynamically request an 8 bit status byte or firmware version from the OMR |
Data Flow Control |
Utilizes XON/XOFF to control the flow of data from the OMR to the application program |
Data Output |
Binary ASCII Values |
Microprocessor |
Motorola 16-bit microcontroller |
Timing Track Selection |
Select top (right)/bottom (left) for the location of the timing track |
Timing Track Alignment |
In-line (data mark area between leading and trailing edge of timing mark) |
Dimensions |
6.5 wide x 9.8 high x 7.7 long (165.1 mm wide x 248.9 mm high x 195.58 mm long) |
Power Requirements |
Universal power adapter 100 - 240 VAC 47 - 63 Hz |
Operating Conditions |
41° to 113° Fahrenheit; 5° to 45° centigrade; 30% to 80% humidity, noncondensing |
Weight |
7.5 lbs (3.4 kg). Shipping weight 9 lbs (4.08 kg) with universal power adapter |